Jasminer X4-Q-Z 840Mh/s Ethereum Classic Miner

840Mh/s Ethereum Classic Mining Performance

The Jasminer X4-Q-Z mines the EtHashETC algorithm at a maximum hashrate of 840Mh/s ±10%. Its rated power consumption of 380W ±10% gives the miner an estimated efficiency of approximately 0.45J/Mh.

This combination allows the machine to provide dedicated Ethereum Classic mining power without demanding the several thousand watts required by many high-performance ASIC miners. Actual mining output will still depend on pool performance, network difficulty, electricity costs, uptime and the condition of the unit.

Before purchasing the Jasminer X4-Q-Z miner, calculate your expected electricity expense and compare it with estimated mining revenue. Cryptocurrency profitability changes continually and should never be presented as guaranteed income.

Low-Power Jasminer Mining Efficiency

One of the main characteristics of the Jasminer X4-Q-Z is its 380W ±10% power rating. Lower power demand may make the machine easier to integrate into locations where electrical capacity is limited, provided the circuit and wiring meet the required safety standards.

At its nominal ratings, the miner uses approximately 9.12kWh of electricity during 24 hours of continuous operation. Actual usage can vary because the manufacturer provides a ±10% power tolerance. Electricity rates differ by location, so buyers should calculate operating costs using their local price per kilowatt-hour.

For additional manufacturer information and current product resources, visit the official Jasminer website.

Cooling System and 40dB Noise Rating

The Jasminer X4-Q-Z Ethereum Classic miner includes two integrated cooling fans that move air through the enclosure and help control operating temperatures. The stated noise level is approximately 40dB ±10%, which is lower than the published noise ratings of many industrial ASIC miners.

Nevertheless, the miner should not be treated as completely silent. Fan speed and perceived sound can change according to room temperature, airflow, dust accumulation and the workload placed on the device. Install the machine in a clean and well-ventilated space rather than inside an enclosed cabinet.

The recommended operating temperature is 0–40°C, with relative humidity between 5% and 95%. Avoid condensation, water exposure, blocked air passages and excessive airborne dust. Maintaining steady airflow can support stable operation and help reduce unnecessary strain on the cooling system.

Jasminer X4-Q-Z Installation Requirements

Before setting up the Jasminer X4-Q-Z, prepare a stable network connection, a compatible power outlet, an Ethernet cable, an Ethereum Classic wallet address and access to an EtHashETC-compatible mining pool.

1. Place the miner on a stable surface in a dry, ventilated location.
2. Confirm that the available electrical circuit can safely support the miner.
3. Connect the miner to the local network using an Ethernet cable.
4. Connect the power supply according to the manufacturer’s instructions.
5. Locate the miner’s IP address through the router or an approved IP detection tool.
6. Open the control panel and enter the selected mining-pool information.
7. Add the correct ETC wallet or worker details and save the configuration.
8. Monitor the reported hashrate, fan operation and temperature after startup.

Mining hardware generates continuous heat and should be installed with appropriate electrical and ventilation planning. Do not operate damaged equipment, overloaded adapters or unsuitable extension cables.

Why Consider the Jasminer X4-Q-Z?

The Jasminer X4-Q-Z may appeal to Ethereum Classic miners seeking a dedicated ASIC with moderate power requirements. Its combination of 840Mh/s ±10%, 380W ±10% consumption, 5GB memory and a stated 40dB ±10% noise level distinguishes it from larger industrial machines that require significantly more electricity and sound management.

The miner’s Ethernet interface also provides the stable wired connection generally preferred for uninterrupted mining. Its 100–240V input range offers installation flexibility, although buyers must still use suitable electrical equipment for their country and location.

Profitability is not fixed. Before ordering, review ETC network conditions, pool fees, electricity prices and potential import expenses. You can also compare this unit with other machines in our ASIC mining equipment category.

Frequently Asked Questions