Description
Bitmain Antminer X9 1MH/s RandomX Miner
The Bitmain Antminer X9 is a high-performance air-cooled mining server developed for the RandomX algorithm. It delivers a rated hashrate of approximately 1,000KH/s, equal to 1MH/s, while consuming around 2,472W.
With rated efficiency of approximately 2.47J/KH, the Bitmain Antminer X9 is designed for professional RandomX mining environments where stable high-voltage power, continuous ventilation, Ethernet networking and industrial noise management are available.
Bitmain markets the machine as an XMR RandomX miner. However, the Monero Project officially describes RandomX as a CPU-focused, ASIC-resistant proof-of-work algorithm. Buyers should therefore verify current Monero network rules, firmware support, mining-pool acceptance and algorithm compatibility before purchasing the machine specifically for XMR mining.
The Bitmain Antminer X9 is not a quiet desktop miner. With approximately 2.47kW of continuous electrical demand, four cooling fans and a published noise level of around 76dBA, it is better suited to mining farms, warehouses, workshops and managed hosting facilities.
Browse related equipment in our RandomX miner collection, explore additional ASIC miners, or visit Hash Titans for professional cryptocurrency-mining hardware.
Bitmain Antminer X9 Key Features
The Bitmain Antminer X9 combines high RandomX hashrate with a server-grade chassis, four-fan air cooling and wired Ethernet management.
- Manufacturer: Bitmain
- Model: Antminer X9
- Also known as: XMR Miner X9
- Algorithm: RandomX
- Rated hashrate: 1,000KH/s or 1MH/s
- Rated power consumption: 2,472W
- Rated efficiency: 2.47J/KH
- Cooling method: Industrial air cooling
- Fan count: 4
- Published noise level: Approximately 76dBA at 25°C
- Network interface: RJ45 Ethernet
- Published input voltage: 220–277V AC
- Miner dimensions: Approximately 361 × 219 × 293mm
- Packaged dimensions: Approximately 630 × 350 × 430mm
- Net weight: Approximately 17.5kg
- Gross weight: Approximately 20.2kg
- Recommended environment: Mining farms and hosting facilities
Bitmain Antminer X9 Specifications
| Manufacturer | Bitmain |
|---|---|
| Model | Antminer X9 |
| Alternative name | XMR Miner X9 |
| Mining algorithm | RandomX |
| Rated hashrate | 1,000KH/s or 1MH/s |
| Rated power consumption | 2,472W |
| Rated efficiency | Approximately 2.47J/KH |
| Cooling system | Air cooling |
| Cooling fans | 4 |
| Noise level | Approximately 76dBA at 25°C |
| Network connection | RJ45 Ethernet |
| Input voltage | 220–277V AC |
| Miner dimensions | Approximately 361 × 219 × 293mm |
| Packaged dimensions | Approximately 630 × 350 × 430mm |
| Net weight | Approximately 17.5kg |
| Gross weight | Approximately 20.2kg |
| Published operating temperature | Approximately −20°C to 45°C |
| Storage temperature | Approximately −40°C to 70°C |
| Operating humidity | Approximately 10–90%, non-condensing |
| Bitmain launch announcement | January 2026 |
| Commercial availability | Depends on Bitmain production and shipping batches |
| Warranty | Subject to Bitmain or seller warranty terms |
Specification note: Bitmain officially lists the Bitmain Antminer X9 at 1,000KH/s, 2,472W and approximately 2.47J/KH. Buyers should check the final factory label, product manual and sales agreement because operating tolerances and batch specifications may vary.
Bitmain Antminer X9 RandomX Mining Performance
The Bitmain Antminer X9 produces approximately one million RandomX hashes per second. This output is significantly higher than that of an individual consumer processor, although network acceptance and usable hashrate depend on firmware and pool compatibility.
Actual pool-side performance may vary because of:
- Hashrate tolerance
- Firmware version
- RandomX network implementation
- Pool compatibility
- Pool latency
- Rejected or stale shares
- Ambient temperature
- Cooling efficiency
- Power-supply stability
- Ethernet reliability
- Machine uptime
Operators should compare the local Bitmain Antminer X9 dashboard with accepted pool-side hashrate over several hours. A local display showing 1MH/s does not guarantee that the pool is accepting all submitted work.
Important Monitoring Values
- Real-time hashrate
- Average accepted hashrate
- Accepted shares
- Rejected shares
- Stale shares
- Hashboard status
- Hardware errors
- Chip temperatures
- Fan speeds
- Measured wall power
- Pool latency
Bitmain Antminer X9 Power Efficiency
The rated efficiency of the Bitmain Antminer X9 is calculated as follows:
2,472W ÷ 1,000KH/s = approximately 2.472J/KH
Rounded to Bitmain’s published figure, the miner delivers approximately 2.47J/KH.
Efficiency measures the amount of electrical power required to produce a unit of RandomX hashrate. It does not guarantee profitability.
Mining results also depend on:
- Current coin price
- RandomX network difficulty
- Block rewards
- Pool fees
- Electricity rate
- Cooling cost
- Hardware purchase price
- Firmware compatibility
- Machine uptime
Bitmain Antminer X9 Electricity Consumption
At a continuous nominal load of 2,472W, estimated electricity consumption is:
- 59.328kWh per day
- 415.296kWh per week
- 1,779.84kWh per 30-day month
- 21,654.72kWh per year
Estimated monthly electricity costs are:
- At $0.04/kWh: approximately $71.19
- At $0.05/kWh: approximately $88.99
- At $0.06/kWh: approximately $106.79
- At $0.08/kWh: approximately $142.39
- At $0.10/kWh: approximately $177.98
- At $0.15/kWh: approximately $266.98
- At $0.20/kWh: approximately $355.97
- At $0.30/kWh: approximately $533.95
These estimates cover only the miner’s nominal electrical demand. Extraction fans, air conditioning, transformers, network switches and electrical-distribution losses may increase total operating cost.
Use a suitable wall meter or power-distribution monitoring system to confirm the actual consumption of the Bitmain Antminer X9.
Bitmain Antminer X9 and RandomX Compatibility
The Bitmain Antminer X9 is marketed by Bitmain as a RandomX mining server. RandomX is a proof-of-work algorithm based on random-code execution and memory-intensive operations.
The official RandomX implementation states that the algorithm is optimized for general-purpose CPUs and is designed to reduce the efficiency advantage of specialized hardware.
Monero’s official website also describes RandomX as ASIC-resistant and CPU-friendly. Because the Bitmain Antminer X9 is marketed as specialized RandomX hardware, buyers should not assume permanent Monero compatibility without confirming current network and firmware conditions.
Verify Before Purchasing
- Current Monero proof-of-work rules
- Bitmain firmware compatibility
- Pool acceptance of X9 shares
- Current RandomX implementation
- Possible network upgrades
- Supported Stratum protocol
- Available mining coins
- Seller refund policy for compatibility issues
Review the official Monero mining documentation and the official RandomX repository before deploying the miner.
Cryptocurrencies for Bitmain Antminer X9
The Bitmain Antminer X9 is intended for cryptocurrencies using a compatible RandomX implementation.
Monero
Bitmain markets the X9 as an XMR miner. However, Monero’s official position is that RandomX is ASIC-resistant and intended for consumer CPUs. Confirm compatibility directly with current mining pools and network documentation.
Zephyr
Zephyr is frequently listed by mining calculators as a RandomX-compatible network. Pool availability, algorithm parameters and profitability can change, so miners should verify support before configuration.
Other RandomX Networks
Other cryptocurrencies may use RandomX or modified RandomX variants. A shared algorithm name does not always mean that the Bitmain Antminer X9 can mine every implementation.
Algorithm compatibility does not guarantee:
- Pool acceptance
- Firmware support
- Profitable mining
- Available exchanges
- Wallet support
- Long-term network activity
Bitmain Antminer X9 Mining-Pool Configuration
The Bitmain Antminer X9 connects to compatible RandomX pools through its RJ45 Ethernet interface.
Pool configuration normally requires:
- A compatible Stratum server address
- A wallet address or pool account
- A worker name
- A pool password
- Secondary and tertiary backup pools
Pool Selection Checklist
- Explicit Antminer X9 support
- RandomX implementation
- Pool fee
- Payout method
- Minimum payout threshold
- Regional server location
- Historical uptime
- Network hashrate concentration
- Worker-monitoring tools
- Support responsiveness
After setup, confirm that the pool dashboard shows accepted shares. A miner can display local hashrate while sending incompatible or rejected work to the pool.
Bitmain Antminer X9 Electrical Requirements
The published input-voltage range for the Bitmain Antminer X9 is approximately 220–277V AC. It should not be connected directly to an ordinary 110–120V residential outlet.
Approximate current at the nominal 2,472W load is:
- Approximately 11.24A at 220V
- Approximately 10.75A at 230V
- Approximately 10.30A at 240V
- Approximately 9.89A at 250V
- Approximately 8.92A at 277V
Actual current may vary because of input voltage, power factor, PSU efficiency, operating mode and startup behaviour.
Electrical Preparation
- Correctly grounded 220–277V circuit
- Properly rated two-pole breaker
- Cables sized for continuous electrical load
- Compatible Bitmain power connectors
- Overcurrent protection
- Surge protection
- Secure cable connections
- Power-distribution monitoring
- Emergency disconnect access
- Compliance with local electrical codes
A qualified electrician should inspect the installation before the Bitmain Antminer X9 is connected.
Bitmain Antminer X9 Cooling and Noise
The Bitmain Antminer X9 uses four high-speed fans to move air through the miner’s heatsinks and hashboards. At 2,472W, the machine releases approximately 2.47kW of continuous heat into the room.
The published noise rating of approximately 76dBA makes the miner unsuitable for bedrooms, offices and normal shared living spaces.
Cooling Recommendations
- Provide a clear cool-air intake.
- Keep the exhaust path unobstructed.
- Separate hot exhaust from intake air.
- Prevent hot-air recirculation.
- Use adequate extraction fans.
- Consider properly designed exhaust ducting.
- Monitor inlet and outlet temperatures.
- Remove dust from fan guards and heatsinks.
- Do not operate the miner in a sealed cabinet.
- Shut down the unit if a fan fails.
Air conditioning may be necessary in warm climates or rooms containing several miners.
Bitmain Antminer X9 Installation Guide
- Inspect the package for transport damage.
- Confirm that the factory label states Antminer X9.
- Verify the rated voltage, hashrate and power specifications.
- Place the miner on a stable mining rack.
- Provide unobstructed intake and exhaust airflow.
- Connect the RJ45 Ethernet cable.
- Connect the approved high-voltage power system.
- Power on the miner.
- Locate its IP address using the router or Bitmain IP tool.
- Open the miner’s web-based management interface.
- Change default credentials where supported.
- Install only official or approved X9 firmware.
- Enter the primary compatible mining-pool address.
- Add the wallet or pool-account information.
- Configure backup pool servers.
- Save the settings.
- Wait for the machine to begin submitting shares.
- Monitor hashrate, temperatures, fan speeds and rejected shares.
During initial operation, monitor the Bitmain Antminer X9 for excessive temperatures, abnormal fan noise, repeated restarts, missing hashboards and overheated power connections.
Bitmain Antminer X9 Maintenance
Routine maintenance helps the Bitmain Antminer X9 maintain stable cooling, networking and accepted hashrate.
- Inspect all four cooling fans.
- Remove dust from fan guards and heatsinks.
- Monitor inlet, outlet and chip temperatures.
- Compare local and pool-side hashrate.
- Review rejected shares and hardware errors.
- Inspect power cables for heat damage.
- Check Ethernet cables and network switches.
- Maintain room extraction equipment.
- Back up pool settings before firmware changes.
- Use only firmware intended for the X9.
- Disconnect power before cleaning or servicing.
Official product and support resources are available through the Bitmain website.
Bitmain Antminer X9 Buying Considerations
Before purchasing a Bitmain Antminer X9, evaluate the full ownership cost and confirm current RandomX network compatibility.
Check Before Ordering
- Current Bitmain batch status
- Exact 1,000KH/s model
- New, used or refurbished condition
- Current firmware version
- Pool compatibility
- Monero network compatibility
- Measured wall power
- Hashboard condition
- Fan condition
- 220–277V electrical support
- Power-cable inclusion
- Warranty start date
- Seller return policy
- Shipping insurance
- Import duties and taxes
Be cautious with listings that guarantee fixed daily income. RandomX mining revenue can change because of coin prices, difficulty, block rewards, pool performance and network upgrades.
Contact Hash Titans to check current availability, shipping terms and purchase support for the Bitmain Antminer X9.
Bitmain Antminer X9 Processing and Shipping
- In-stock units are generally prepared according to the seller’s current processing schedule.
- Preorder or manufacturer-batch units may have a separate estimated dispatch window.
- Available couriers may include DHL, FedEx, UPS or other international carriers.
- A tracking number is normally issued after the order leaves the warehouse.
- Delivery time depends on destination, customs processing and courier capacity.
- Import taxes, customs duties and brokerage fees may be charged separately.
- The buyer should inspect the package immediately after delivery.
- Transport damage should be photographed and reported promptly.
Do not promise a fixed 48–72-hour dispatch period unless that timeframe accurately reflects the current stock location and order terms.
Bitmain Antminer X9 Frequently Asked Questions
What is the Bitmain Antminer X9?
The Bitmain Antminer X9 is an air-cooled RandomX mining server rated at approximately 1,000KH/s.
What is its rated hashrate?
Its rated hashrate is approximately 1,000KH/s, which equals 1MH/s.
How much power does it consume?
Bitmain lists nominal power consumption at approximately 2,472W.
What is its efficiency?
Its rated efficiency is approximately 2.47J/KH.
Which algorithm does it use?
It is marketed for the RandomX algorithm.
Can the Bitmain Antminer X9 mine Monero?
Bitmain markets it as an XMR miner, but Monero officially describes RandomX as ASIC-resistant and CPU-focused. Current compatibility should be confirmed with the network, firmware provider and mining pool.
Can it mine Zephyr?
Zephyr is commonly listed as RandomX-compatible, but pool and firmware support should be verified before configuration.
Can it mine Bitcoin?
No. Bitcoin uses SHA-256 rather than RandomX.
Does it use Wi-Fi?
No standard Wi-Fi interface is listed. The machine uses wired RJ45 Ethernet.
What voltage does it require?
Bitmain publishes an input range of approximately 220–277V AC.
Can it run on a 120V outlet?
No. A standard 120V residential circuit does not meet the published input-voltage requirement.
How loud is it?
The published noise level is approximately 76dBA at 25°C.
How many fans does it have?
It uses four high-speed cooling fans.
What are its dimensions?
The miner measures approximately 361 × 219 × 293mm.
How much does it weigh?
The listed net weight is approximately 17.5kg.
How much electricity does it use daily?
At 2,472W, continuous operation consumes approximately 59.328kWh per day.
Is it suitable for home mining?
It is generally unsuitable for ordinary living spaces because of its voltage, heat and approximately 76dBA noise output.
Is the Bitmain Antminer X9 profitable?
Profitability is not guaranteed. Network compatibility, coin prices, difficulty, pool fees, electricity and cooling all affect results.
Does it include a warranty?
Warranty coverage depends on Bitmain’s applicable batch terms, seller conditions and warranty start date.
Where can I buy the Bitmain Antminer X9?
You can contact Hash Titans to confirm current availability, product condition, shipping options and warranty support.
Buy Bitmain Antminer X9 RandomX Mining Hardware
The Bitmain Antminer X9 delivers approximately 1MH/s of RandomX performance while consuming around 2,472W. Its four-fan cooling system, wired Ethernet interface and 220–277V electrical requirement make it a professional mining server rather than a quiet desktop device.
Before ordering, verify current RandomX network compatibility, firmware support, accepted pools, power infrastructure, cooling capacity, warranty terms and seller return conditions.
Visit Hash Titans to compare the Bitmain Antminer X9 with other RandomX and professional cryptocurrency-mining systems.
Official product information can be reviewed through the Bitmain product catalogue.
Reviews
There are no reviews yet.